Graphite Inset (4.9)

Graphite Inset (4.9)

Product no.: Graphite Inset
Graphite Inset (4.9)
Graphite Inset (4.9)
Graphite Inset (4.9)
Price plus VAT, plus delivery

Better built and better performance. Simply better all round ? that?s the lasting beauty of a Graphite

The Graphite Inset has been designed to make it easy to install within a standard fireplace opening allowing you to keep your original fire surround. The 4.9kW output will provide enough heat for the average room and the big picture window’s view of the controllable flame pattern will leave your old open fire in the shade. Plus, the Graphite Inset will be three to four times more efficient so you’ll also use considerably less fuel. The premium quality cast iron front frame, door and firebricks and the precision-welded fire chamber ensure that the Graphite Inset will not only give you many years of abundant heat but will also be economic to run. Fits standard UK / Irish fireplace aperture for easy installation Data from CE EN13229 tests in the UK by Kiwa Gastec SEAI Harp approved and listed, your guarantee of performance Pre-heated Airwash System to keep your glass cleaner Efficient multi-fuel operation. Takes logs up to 250 mm (10”) Longer-lasting fine cast iron front frame, door and firebricks Five Year Extended Warranty from one of the world’s leading stove makers

Primary Air Control Air which enters under the grate for multi fuel burning and to help get a wood fire started

Secondary Air Control Air which enters at the top of the fire chamber to ensure a cleaner burn and
effective wood burning (pull out to open)

Airwash System Part of the secondary air control system which diverts hot air down along the front of the glass to burn off unwanted sooty particulates and help keep it clean

General Specification
Model Name Graphite Inset
Model Number GR357i
Dimensions (mm): Facia H605 W490 D95
Dimensions (mm): Firebox Ext H515 W380 D175
Net Weight 83 kg
Gross Weight (packed) 95 kg
CPR Declaration of Performance
Data from GasTec CE Test EN13229
Fuel Mineral Fuel & Wood Logs
Nominal Heat Output 4.9 kW
Test Duration (approx) 1.02 hrs
Efficiency (net) 75.2%
Mean CO Emission (at 13%) 0.15
Mean Flue Gas Temperature 302ºC
Flue Gas Mass Flow 4.8 g/s
ANCIT (mineral fuel)
Nominal Heat Output (wood) 4.8 kW
Test Duration (approx) 3.99 hrs
Efficiency (net) 68.3%
Mean CO Emission (at 13%) 0.21
Mean Flue Gas Temperature 312ºC
Flue Gas Mass Flow 6.3 g/s
Minimum Distance to Combustible Materials
Top (shelf) 600 mm
Sides 250 mm
Flue configuration top only
Flue pipe / liner diameter 150 mm (6?)
Minimum flue height
from base of stove 4500 mm (15?)
Wood Fuel Requirements
Wood Logs: Moisture content <20%
Maximum Log Length 250 mm

Browse this category: The Graphite Range